Emergency Mold Removal in Phoenix

Though Phoenix is dry during most of the year, it’s not impervious to the scourge of mold. A mold emergency can happen in your home for any number of reasons. A few are water damage, lack of HVAC humidity control, and improper ventilation.

It doesn’t matter in the end. What does matter is how it can affect the health of your home and your family. If not properly treated as soon as possible it has lingering consequences.

So, when you detect a problem, here are four ways to respond to a mold emergency.

1. Assess the damage

Sure, you may find and take care of a small spot of mold you discovered on a basement wall. However, is that the only location? You want to check other areas to see how far it has spread.

When that’s done, take a look at the vents. If you see spots of black mold, then you want to stop all HVAC operations as soon as possible.

2. Get out of the area

Don’t linger in areas where mold is discovered. Shut down the location until you can figure out what’s going on. If you detect mold in living or sleeping areas, then you definitely want to pack some items and stay somewhere else for a few nights until the issue is resolved.

3. Determine the source

The mold has to come from somewhere. So, you need to do some detective work in order to figure out its source. Check for water damage, closed vents, and dirty air filters in the HVAC unit in Phoenix.

If you can’t find the source, reach out to a biohazard company that responds to a mold emergency in Phoenix. They’ll determine the source and work to correct it as quick as possible.

4. Contact a restoration service

Once the mold source is found and eliminated it’s time for mold removal. This is a toxic substance, so don’t go it alone. No matter if you have protective gear and proper cleaning solutions.

Instead, contact our emergency mold removal company in Phoenix that deals with biohazard cleanup. They will provide an estimate for the work. In addition, they should detail the chemicals used to remove the mold and clean the walls or vents so not a spec of it remains.